Sow’s Ear to be Auctioned at the 2013 WCHF in Washington

It all started at the West Coast Horn Fair last year in Morro Bay, California, Scott Morrison was given the challenge of starting with a bad cow horn (Sow’s Ear) and turning it into a “Silk Purse”.

Finished Banded Horn by Scott Morrison

Finished Banded Horn by Scott Morrison

John (Bigsmoke) Shorb gave a talk on “choosing your horn”. He had several examples of horns with defects that would lend a person to pass when choosing. One example that he recommended passing up was a thin, translucent, misshapened horn that had a severe delamination at the tip.

Scott Morrison recalls, “I was sitting in the back of the room with Steve Skillman in “Heckler’s” row and I just couldn’t let this go by. I told John something to the effect that this was nonsense and that there was a lot that one cold do with the horn. John came right back and said that when the horn came to me (it was being passed around the room) to go ahead and keep it. The gauntlet had been taken off and the challenge issued;  John was pretty much telling me to put up or shut up.”

“Well now honor was at stake and I could not back down. So I took up the challenge and not only would I take this “Sow’s Ear” and make some sort of “Silk Purse” with it, but it would come back to the West Coast Horn Fair in 2013 to be  auctioned off.”

“The horn sat in my to do box until recently when I decided that I needed to “get-r-done”. When I got back from the WCHF last year, all I had done with it was to cut off the tip and drill the spout. I had originally thought that the horn would be good for a Southern banded horn with an applied tip and when I cut and drilled it, I saw that there was plenty of material for such a horn.”

The de-lamination in this tip was sanded off.

The de-lamination in this tip was sanded off.

“As you can see in the photo, there is approximately 1/2 inch at the tip, which would be plenty for an applied tip or even threaded for a screw tip. The discoloration at the tip is where the internal separation of the horn layers occurred. I decided on a horn with an applied antler tip.”

“I had turned a base plug and fitted a rear ring to the horn and when I did a trial fit of an antler tip the horn looked too long to my eye. I ended up taking about 3/4 inch more off of the tip which improved the proportion. There was still plenty of material at the tip so I had no problem fitting the antler.”

Applied Tip made from antler repair the defective tip.

Applied Tip made from antler repair the defective tip. 

“Of greater concern to me wasn’t the tip but the thinness of the horn. When the horn was cleaned and polished, there was left humps and hollows from the sander that was used. One side of the horn was also pretty flat. Normally, there is enough wall thickness on a horn that I can work it to some semblance of round. However, since this horn was to thin, I was afraid that if I tried to round it I might break through the wall. The best I could hope for was to remove the humps and hollows and have a smooth body. The flat spot would have to remain.”

Scott Morrison Horn before staining.

Scott Morrison Horn before staining.

“I first thought of having just one band on the horn, but decided that this would be too uninteresting so I went with three bands. I heated the bands so they were pliable and they slipped around the oblong shape of the body easily, leaving no gaps. The base plug is walnut. The button finial is turned horn and tapered to slip fit into the base.”

Banded horn By Scott Morrison

Banded horn By Scott Morrison

Two of the Three bands

Two of the Three bands. Scott says the flat spot is in the picture.

“I heated the bands so they were pliable and they slipped around the oblong shape of the body easily, leaving no gaps.”

Base Plug with WCHF for West Coast Horn Fair.

Base Plug with WCHF for West Coast Horn Fair.

“The base plug is walnut. The button finial is turned horn and tapered to slip fit into the base.”

Stained with aqua fortis, then added a patina

Stained with aqua fortis, then added a patina

“The horn was stained with aqua fortis, then a patina applied with a combination of shoe polish and black powdered tempura paint.”

The horn is translucent and light as a feather.

The horn is translucent and light as a feather.

“It measures 15 inches along the outside curve and 2 1/4 inches across at the base. The horn is nice and translucent and light as a feather.”

“I think it is an acceptable “Silk Purse” made from the “Sow’s Ear” that was the original horn.”

Advertisements

Tags: , , , ,

One Response to “Sow’s Ear to be Auctioned at the 2013 WCHF in Washington”

  1. Jack Kothera Says:

    very nice job…thank you for sharring……….Jack

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: